Define The Media Series - Oce TDS400-CS User Manual

Define the media series

Introduction
Use this setting to define the default media range.
When you select a new media size on the operator panel of the printer, only the
sizes in the defined paper series are available.
When 'Auto format' is enabled, the 'Paper series' setting selects which sizes are
used (only those available in the paper series).
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following
steps to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key operator' and enter the password.
2.
How to define the media series
Click 'View' and select 'KO settings'.
1.
Navigate to KO - System - Media - Paper series.
2.
Define the required value.
3.
Setting
Paper series
Click 'Apply' to confirm the settings.
4.
Click 'File' and select 'Log off' to prevent unauthorised use.
5.
138 User manual
Group
'DIN'
'DIN carto'
'ANSI small'
'ANSI mixed'
Values
A4, A3, A2, A1, A0, E+,
B1_707, B2_707
A4, A3, A2, A1, A0, E+,
B1_700, B2_700
A, B, C, D, D+ E, E+, 30 inch
A, A+, B, B+, C, C+ D, D+
E, E+, 30 inch