Oce TDS400-CS User Manual page 53

The toolbar
[13] The toolbar buttons
Button Function
'Hold' Place a job on hold in the print queue .
'Resume' Continue a job that was placed on hold.
'Move to top' Move a job to the top of the print queue, to give the job priority.
'Delete' Delete a job from the print queue.
'Properties' View the properties of a selected job.
'Print' Print a job from the print queue.
[13] The toolbar buttons
The status bar
The status bar at the bottom of the Océ Queue Manager displays the following.
The system status (connected or disconnected).
The system name ('local host' if you work on the Océ Power Logic
controller).
The job status (for example 'Printing').
The user mode ('Key operator', 'Repro operator', 'System administrator',
'Service operator' or 'Anonymous').
The window for the print queue
The print queue window in the left-hand pane contains two sections.
The top section above the separation line shows the job that is printed.
The bottom section under the separation line shows the jobs that wait to be
printed. The window displays the jobs in the order in which the jobs are
received.
The window for the inbox queue or history queue
The inbox queue in the right-hand pane contains the jobs that were sent to the
inbox on the controller. You can print the jobs, delete the jobs and view the
properties of the jobs. The print jobs are sent to the inbox when the setting KO
- System - Job management - Print jobs in the Océ Settings Editor is set to
inbox or when 'Send to inbox' is enabled in the driver.
The history queue in the right-hand pane contains the jobs that have been
printed. You can print the jobs, delete the jobs and view the properties of the
jobs. Use the setting KO - System - Job management - History queue - Print
job lifetime in the Océ Settings Editor to define how long the jobs must remain
in the history queue.
Get to know the Océ Power Logic® controller applications
®
53