The belt unit
Introduction
If your folder has a belt unit, you can stack a maximum of 75 folded A0 prints.
You can adjust the side guides of the belt, depending on the width of the folded
package.
Before you begin
Select 'Belt' as folded output delivery, as described in the (see 'How to define
the folded output delivery' on page 233) procedure.
How to adjust the side guides of the belt
Loosen the nuts
1.
[55] Adjust the side guides
[55] Adjust the side guides
Adjust the plate in accordance with the width of the fold package.
2.
Tighten the nuts.
3.
Finish copy and print jobs
241