Oce TDS400-CS User Manual page 245

Clear the set memory at the printer operator panel
Make sure you have access to the system settings.
1.
(see 'How to access the system settings' on page 119)
Navigate to 'Clear setmem' and select this setting.
2.
Select 'Yes'
3.
Press 'next/select' to confirm.
4.
Press 'on-line' to put the printer on-line again.
5.
Shut down the Océ Power Logic controller.
6.
(see 'How to shut down the Océ Power Logic® controller' on page 110)
Maintain the Océ TDS400-CS 245