Turn On And Shut Down The Océ Power Logic® Controller - Oce TDS400-CS User Manual

Turn on and shut down the Océ Power Logic
Introduction
When you turn on the Océ Power Logic
®
Logic
preparation time for print jobs is two and a half minutes, for scan-to-file jobs
and copy jobs three minutes.
How to turn on the Océ Power Logic
Press the on / off key of the Océ Power
1.
After the initial system test of the controller the applications, Océ Queue
Manager, Océ System Control Panel, Océ Settings Editor and Océ Scan
Manager are automatically started. The Océ TDS400-CS is ready.
The Océ Queue Manager and the Océ System Control Panel applications
Note:
are shown on the screen. The Océ Settings Editor is minimised.
Result
The Océ Power Logic
Manager and the Océ System Control Panel. The Océ Settings Editor is
minimised.
How to shut down the Océ Power Logic
Open the Océ System Control Panel.
1.
Click 'System' to open the system menu.
2.
Click 'Shutdown'
3.
A dialogue box displays.
Click 'Yes' to confirm.
4.
Turn off the display.
5.
Result
The green light of the on / off key is turned off. The Océ Power Logic
controller is turned off.
110 User manual
controller needs some preparation time before it can handle jobs. The
®
controller
®
controller starts up and displays the Océ Queue
®
controller, the Océ Power
®
Logic controller.
®
controller
®
controller
®