Use Océ Print Exec® Workgroup Lt To Send Print Jobs To The Océ Tds400; Printer - Oce TDS400-CS User Manual

Use Océ Print Exec
TDS400 printer
Introduction
Océ Print Exec
allows you to send print jobs to the Océ TDS400 printer through your web
browser. Upgrades to a full version are available as an option.
For this application a separate Océ Print Exec
Note:
is available.
When to do
Use Océ Print Exec
Select and collect the files to print (documents and drawings), in a print job.
1.
You can add a maximum of 100 documents or drawings to a print job.
Configure the print job.
2.
You can set the document or drawing settings and the print job settings. You
can add a banner to the print job and add a settings configuration for a print job.
Submit the print jobs to the printer queue or inbox queue.
3.
Check the print job and the printer configuration status.
4.
You can view the status information of the printer configuration and the
available media.
Required tools
Microsoft® Internet Explorer® 5.0 (or higher versions) or Netscape
Navigator® 6.0 (or higher versions).
TCP/IP network that connects the printer and the end user workstation.
How to connect to Océ Print Exec
Enter the following URL in your workstation browser: http://'printer name'.
1.
'Printer name' is the name of printer that you use for your print jobs.
Note:
If you enter the URL for the first time, the required software is installed
Note:
automatically at your workstation.
Print jobs
®
Workgroup LT to send print jobs to the Océ
®
Workgroup LT is an print job submission application that
®
Workgroup LT to do the following.
®
Workgroup LT
®
Workgroup user manual
169