Table of Contents
Advertisement
Align the roll with the correct lines on the roll holder while pressing the knob.
5.
The line must be visible.
Put the roll holder with the media in the drawer
6.
[66] Reposition the roll
[66] Reposition the roll
Feed the media between the input guide plates against the rollers.
7.
[67] Feed the media
[67] Feed the media
Turn the rollers until the media is visible. Also refer to the label inside the
8.
drawer.
If you inserted a roll with another media or with a different width, you must
9.
program the correct width and material type. If you need to cut the paper to get
a straight leading strip, select 'Cut media'.
Close the drawer.
10.
Press the On-line key.
11.
254
User manual
Advertisement
Table of Contents
