Set Up Your Workflow With The Océ Settings Editor; Define The Job Templates - Oce TDS400-CS User Manual

Set up your workflow with the Océ
Settings Editor

Define the job templates

Introduction
Job templates enable you to easily perform copy jobs and scan-to-file jobs that
you do very often. Job templates appear on the scanner operator panel when
you select 'Copy' or 'Scan-to-file'.
A job template defines the following.
The top 5 settings.
You can select 5 settings that you want to see immediately when you open
the job template at the scanner operator panel. The top 5 settings are the
settings that you need to change frequently if you use this job template. You
can see the remaining settings when you scroll downwards.
The default values for all available settings.
You can define a default value per setting. Define a value that you use very
often.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following
steps to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key operator' and enter the password.
2.
Set up your workflow with the Océ Power Logic® controller applications 133