Remove Strip - Oce TDS400-CS User Manual

'Remove strip'

Use the 4 settings below to define the blank areas around the image.
[31] Remove strips
Setting
'Remove strip' -
'Leading'
'Remove strip' -
'Trailing'
'Remove strip' -
'Left'
'Remove strip' -
'Right'
[31] Remove strips
228 User manual
Icon Result
Use this setting to remove a strip at
the top of the image. This action
decreases the print or file length.
The top side of the image is the
Note:
side that you feed into the scanner.
Use this setting to remove a strip at
the bottom of the image. This action
decreases the print or file length.
Use this setting to remove a strip
from the left side of the
image/original viewed from the
face-up direction. This action
decreases the print or file width.
Use this setting to remove a strip
from the right side of the
image/original viewed from the
face-up direction. This action
decreases the print or file width.