Save, load,and print the settings
Introduction
It is possible that you need different settings for different customers,
departments or other conditions. For this reason, you can save the settings to a
file and then load the settings from a file.
The Océ TDS400-CS has the following special files for your use.
Backup.kos/Backup.sas
1.
These files contain the previous values for the key operator settings and the
system administrator settings before the last 'Apply'.
Current.kos/Current.sas
2.
These files contain the values for the key operator settings and the system
administrator settings after the last 'Apply'.
If you need a complete overview of all settings defined in the Océ Settings
Editor, you can print a list of all current settings.
How to save the settings to a file
From the 'File' menu, select 'Save as'.
1.
You can also click the 'Save as' button on the toolbar.
If the client is a local client, the screen displays a dialogue box. The user can
enter a file name. The file is saved in the specified directory on the system.
If the client is a remote client, the screen displays a dialogue box. The user can
enter a directory name and a file name.
Repro operators and anonymous users are not authorised to save the
Note:
settings to a file.
Get to know the Océ Power Logic® controller applications
41