The easiest method to apply the parameters to the applications is to create a
shortcut for an application. Then add the command line properties.
The .exe files are usually located in C:\Program Files\Remote
Note:
Logic\Bin.
Example of a command line parameter
The example below shows how to start the controller applications with the
configuration file 'Myconfig.cfg', connected to the 'MyTCS400' server. The
first language is set to UK English and the second language is set to French.
C:\Program Files\Remote Logic\Bin\AL.exe
server=MyTCS400 language1=en country1=GB language2=fr
country2=FR
66
User manual
configFile=Myconfig.cfg
.