Oce TDS400-CS User Manual page 150

Delete a scanned file
Log on to the key operator mode or the repro operator mode.
1.
Select a file.
2.
From the 'File' menu, select 'Delete'.
3.
You can also click the 'Delete' button on the toolbar.
[28] The Delete button on the toolbar
[28] The Delete button on the toolbar
The system deletes the selected file.
Clear the temporary store
From 'System' menu, select 'Clear temporary store' or,
1.
Use the settings KO - System - Disk cleanup - ... - ... in the Océ Settings Editor
2.
to clear the temporary store automatically.
View the properties of a scanned file
Select a file.
1.
From the 'File' menu, select 'Properties'.
2.
You can also click the 'Properties' button on the toolbar.
[29] The Properties button on the toolbar
[29] The Properties button on the toolbar
150 User manual