Define The Manual Feed Time-Out At The Printer Operator Panel - Oce TDS400-CS User Manual

Define the manual feed time-out at the printer operator panel

Introduction
You can define the time-out period for the manual feed function. The factory
default value is 1 minute. This value indicates that the printer will inform you
during 1 minute after you send the print job, to feed the media into the printer.
After this time-out period expires, the printer prints the next job (either the
print job that is in the queue, or the next print job that arrives if the queue is
empty).
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the manual feed time out
Press the 'on-line' key to turn the printer off-line.
1.
Navigate to 'Media settings' and select this menu.
2.
Navigate to 'Manual feed' and select this menu.
3.
Navigate to 'Time out' and select this menu.
4.
Navigate to the required time out and select this value.
5.
Press the 'on-line' key to turn the printer on-line.
6.
Prepare the Océ TDS400-CS for use
key, the key and the 'previous' key to navigate. Use the
129