Table of Contents
Advertisement
Define the binding edge value
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the binding edge value
Press the 'on-line' key to turn the printer off-line.
1.
Navigate to 'Folding' and select this menu.
2.
Navigate to 'Binding edge' and select this menu.
3.
Navigate to 'Method' and select this menu.
4.
If you selected 'On' in the (see 'How to define the binding method' on
5.
page 236)
of 1 mm; Default value is 20 mm.
Press the 'on-line' key to turn the printer on-line.
6.
Finish copy and print jobs
key, the
key and the 'previous' key to navigate. Use the
procedure, enter a range between 15 - 30 mm, in steps
237
Advertisement
Table of Contents
