Table of Contents
Advertisement
Define the display languages
Define the display languages of the scanner and the controller
Introduction
You can toggle between two languages at the following system components.
The applications of the Océ Power Logic
The operator panel of the Océ TCS4 scanner.
The operator panel of the Océ TDS400 printer provides one language only.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following
steps to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key operator' and enter the password.
2.
How to define the display languages
Click 'View' and select 'KO settings'.
1.
Navigate to KO - System - Regional settings - Display languages - First
2.
language.
Define the default language
3.
Navigate to KO - System - Regional settings - Display languages - Second
4.
language
Define the alternative language.
5.
Click 'Apply' to confirm the settings.
6.
Click 'File' and select 'Log off' to prevent unauthorised use.
7.
Result
You can use the defined settings at the scanner operator panel and the
applications of the Océ Power Logic
Prepare the Océ TDS400-CS for use
®
controller.
®
controller.
115
Advertisement
Table of Contents
