Oce TDS400-CS User Manual page 142

How to place jobs on hold in the Océ Queue Manager
Select the jobs in the print queue.
1.
From the 'Job' menu, select 'Hold', or click the 'Hold' button on the toolbar.
2.
A job that is placed on hold keeps its position in the print queue. The job will
not print until the job is resumed. While a job is on hold, other jobs are printed.
The jobs that were in the queue behind the job on hold are also printed.
You can select more than one job with the mouse and the shift or control key.
The active print job cannot be placed on hold in the Océ Queue Manager.
Note:
How to restart jobs in the Océ Queue Manager
Click the job that was placed on hold.
1.
From the 'Job' menu, select 'Resume', or click the 'Resume' button on the
2.
toolbar.
The job restarts.
You can select more than one job with the mouse and the shift or control key.
How to give priority to jobs in the Océ Queue Manager
Select the jobs in the print queue.
1.
From the 'Job' menu, select 'Move to top', or click the 'Move to top' button.
2.
You can select more than one job with the mouse and the shift or control key.
142 User manual