Table of Contents
Advertisement
(see 'Available settings for scan-to-file jobs' on page 222)
Open a scan-to-file job template with a left softkey.
The top 5 settings appears.
Scroll to a setting.
Select a setting with the left softkey.
Scroll to the required value.
Select the next setting with the left softkey.
Scroll to the required value.
Select 'Close' to close the setting.
Repeat the selection of settings from bullet 3 if you need to define more
settings.
Press the green 'Start' key.
4.
Result
The scanner scans the original and the sends the scanned file to the defined
scan-to-file destination.
220
User manual
Advertisement
Table of Contents
