Table of Contents
Advertisement
Setting
'Remove strip'
'Mirror'
'Lighter/darker'
'Checkprint'
Scan-to-file jobs
Description
Use this setting to define blank areas on the sides
of the scanned image. (see ''Remove strip'' on
page 228)
Use this setting to create a mirrored image of an
original. Mirroring occurs in the transport
direction. (The image is mirrored along the vertical
axis.)
Use this setting to define the exposure of the
original. Negative values mean less exposure and
darker scanned output. Positive values mean more
exposure and greyer scanned output.
This setting can only be set if the colour
Note:
mode you select is grey or black and white.
Use this setting to define if the system prints a
checkprint for a scan-to-file job. The checkprint
represents the quality of the scanned document.
This setting can not be used for scan-to-file
Note:
jobs with colour.
223
Advertisement
Table of Contents
