Table of Contents
Advertisement
How to copy on a cut sheet
Place the original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
[45] Example of a 'Size' icon
[45] Example of a 'Size' icon
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The top 5 settings appears.
Scroll to 'Media' and open this setting with the left softkey.
The 'Feed' setting appears.
Define 'Manual' at the 'Feed' setting with the scroll wheel.
The settings 'Size' and 'Type' appear.
Select 'Size' with the left softkey and define the 'Size' with the scroll wheel.
Select 'Type' with the left softkey and define the 'Type' with the scroll wheel.
Define the number of copies if necessary and press the green start key.
3.
Place the cut sheet media on the manual feed table of the printer.
4.
The printer prints the image face-up.
Note:
Result
The Océ TDS400-CS copies on a cut sheet.
200
User manual
Advertisement
Table of Contents
