Define The Sleep Mode Time-Out Of The Océ Tcs4 Scanner - Oce TDS400-CS User Manual

Define the sleep mode time-out of the Océ TCS4 scanner
Introduction
When the time-out of the Océ TCS4 scanner expires, the Océ TCS4 scanner
enters the sleep mode to save energy. Use the Océ Settings Editor to set the
sleep mode time-out of the Océ TCS4 scanner.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following
steps to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key operator' and enter the password.
2.
How to define the sleep mode time-out of the system
Click 'View' and select 'SA settings'.
1.
Navigate to Path: KO - System - Timers - Sleep mode timer scanner.
2.
Define the required settings.
3.
Click 'Apply'.
4.
Click 'File' and select 'Log off' to prevent unauthorised use.
5.
Result
The sleep mode time-out of the Océ TCS4 scanner is defined.
126 User manual