Table of Contents
Advertisement
Use the scanner operator panel
Introduction
Use the scanner operator panel to define the job settings. You can define the
job settings in two ways.
Use the left softkeys and the scroll wheel.
You can use this method if you prefer a general step by step method.
Use the scroll wheel and scroll-wheel key only.
You can use this method if you prefer a fast method.
Know that the scanner operator panel also uses icons to explain a setting. The
following illustration shows the scanner operator panel of the Océ TCS4
scanner.
(see table 2 on page 25).
Scan-to-file jobs
213
Advertisement
Table of Contents
