Manage The Scanned Files - Oce TDS400-CS User Manual

Manage the scanned files

Introduction
The right-hand pane of the destination area displays information about the
scanned files.
You can do the following to manage the scanned files.
View a scanned file'Auto view'
When is enabled, Océ View Station LT starts automatically to display the
scanned file when the scan to file is complete.
Print a scanned file
Delete a scanned file
View the properties of a scanned file.
View a scanned file
Select a file.
1.
From the 'File' menu, select 'View'.
2.
You can also click the 'View' button on the toolbar.
[26] The View button on the toolbar
[26] The View button on the toolbar
Océ View Station LT starts and displays the file
Enable Auto view
From the 'System' menu, select 'Auto view'.
1.
A check mark in the menu in front of 'Auto view' indicates that 'Auto view' is
enabled.
Print a scanned file
Select a file.
1.
From the 'File' menu, select 'Print'.
2.
You can also click the 'Print' button on the toolbar.
[27] The Print button on the toolbar
[27] The Print button on the toolbar
The system prints the selected file with the default settings defined in the Océ
Settings Editor.
Control your workflow with the Océ Power Logic® controller applications 149