Table of Contents
Advertisement
Install and start Océ Remote Logic
Install Océ Remote Logic® on your system
Introduction
The Océ Remote Logic
Virtual Machine. This section describes the installation procedures for the
different types of platforms.
Before you begin
To install Océ Remote Logic
system must be at least equipped with a Pentium
Installation procedure for Microsoft® Windows® platforms
Insert the Océ Remote Logic
1.
CD-ROM into the CD-ROM drive of your PC.
The installation starts automatically. If does not start automatically, run
2.
Setup.exe.
Select the required language in the installation wizard and click 'OK'.
3.
[12] Select the setup language
[12] Select the setup language
Follow the instructions on the screen to complete the installation of Océ
4.
Remote Logic
You can only use Océ Remote Logic
Note:
system. Refer to your system administrator for help with the installation
procedure for TCP/IP.
Get to know the Océ Power Logic® controller applications
®
application can run on all platforms with Java
®
on Windows
®
CD-ROM or the Océ Power Logic
®
.
®
9.x, NT, ME, XP, or 2000, your
®
233 with 32 Mb RAM.
®
when TCP/IP is enabled on your
®
controller
61
Advertisement
Table of Contents
