Table of Contents
Advertisement
Overview of the finishing settings
Setting
Folded output
delivery
Folding legend
Finish copy and print jobs
Menu path
Description
'Folding' -
Determines where the folder must deliver the
'Delivery'
output.
(see 'Define the folded output delivery' on
page 233)
Note:
automatically if the length of your output is between
2,5 m and 6m.
Note:
belt unit. (see 'The belt unit' on page 241)
'Folding' -
Use this setting to define if the legend of your
'Input' -'Legend'
drawing is on the trailing side of your drawing or on
the leading side. The folder folds the output in such
a manner that the legend of the drawing is on top of
the folded output.
(see 'Define the folding legend' on page 234)
Note:
that you feed into the scanner.
Select 'Stacker' if you have output with a
maximum length of 2,5 m that must be folded
completely (first fold and second fold) and that
you want to collect in the stacker (2) (second fold
delivery). You can collect a maximum of 25 PPP.
Select 'First Fold' if your output must be folded
in one direction only. The output will be
collected in the First Fold Delivery (8)
Choose 'Belt' if you have output with a maximum
length of 2,5 m that must be folded completely
(first fold and second fold) and that you want to
collect in belt (3). You can collect a maximum of
75 PPP.
The 'First Fold' option is selected
You can only choose 'Belt' if your folder has a
Select 'Trailing' if the legend of your drawing is
on the trailing side.
Select 'Leading' if the legend of your drawing is
on the leading side.
The leading side of the drawing is the side
231
Advertisement
Table of Contents
