Clear The Set Memory - Oce TDS400-CS User Manual

Clear the set memory

Introduction
The Océ TDS400-CS has the following two memories.
The set memory.
The set memory contains the copy and print jobs. The Océ System Control
Panel shows the use of the set memory.
The temporary store.
The temporary store contains the files you made with the scan-to-file jobs.
You can clear the temporary memory with the Océ Scan Manager(see
'Clear the temporary store' on page 150).
Before you begin
The system tells you when you need to clear the set memory. You can clear the
set memory at the Océ Queue Manager and at the printer operator panel. Océ
advises you to clear the set memory with the Océ Queue Manager if possible.
When you clear the set memory at the printer operator panel, use the
key and the 'previous' key to navigate. Use the 'next/select' key to select a
menu or a value.
Attention:
copy and print jobs are deleted. You can never undo this action.
Clear the set memory at the Océ Queue Manager
Start the Océ Queue Manager.
1.
Delete jobs from the Océ Queue Manager.
2.
(see 'How to cancel jobs from the Océ Queue Manager' on page 141)
244 User manual
When you clear the set memory at the printer operator panel, all
key, the