Show Interfaces Cos-Queue - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Non-IP Traffic
Class
Untrusted
Traffic Class
Related Commands
Command
classofservice
trust
show interfaces cos-queue
Use this command to display the global class-of-service queue configuration or
the configured for a specified interface.
show interfaces cos-queue [interface]
Syntax Descriptions
Parameter
interface
Command Modes
Privileged Exec
Examples
The following example shows output from the command when no interface is
specified.
(switch) #show interfaces cos-queue
Global Configuration
Interface Shaping Rate......................... 0
Queue Id
Min. Bandwidth
The traffic class used for non-IP traffic. This is only
displayed when the COS trust mode is set to trust IP
Precedence or IP DSCP (on platforms that support IP
DSCP).
The traffic class used for all untrusted traffic. This is only
displayed when the COS trust mode is set to 'untrusted'.
Description
Sets the class of service trust mode of an interface.
Description
The port number.
Scheduler Type
9
387
Advertisement
Table of Contents
