Cable Diagnostics; Show Cablestatus - Cisco Small Business 200 Series User Manual

Administration

Cable Diagnostics

Cable Diagnostics
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following example shows the output of this command when no VLAN is
specified.
(Switch) #show monitor session 1
Port Mirroring is enabled on Following VLAN: None
Session ID Admin Mode
---------- -----------
1 Enable
The following example shows the output of this command when a VLAN is
specified.
(Switch) #show monitor session 2
Port Mirroring is enabled on Following VLAN: 10
Session ID Admin Mode
---------- ----------
1 Enable
Related Commands
Command
monitor session
The commands in this section enable you to run hardware diagnostic tests on
ports and view the results.

show cablestatus

Use this command to display the cable connection status on a selected port.
show cablestatus interface
Probe Port Mirrored Port
----------- --------------
e1 e2
e3
Probe Port Mirrored Port
---------- -------------
e4 e5
Description
Adds a mirrored port (source port) or probe port
(destination port) to a mirroring session and enables the
administrative mode of the session.
2
Type
-------
Rx,Tx
Rx,Tx
Type
-------
Rx
35