Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
cos-queue min-
bandwidth
cos-queue wrr
show interfaces
cos-queue
show classofservice dot1p-mapping
Use this command to display the global Dot1p (802. 1 p) priority mapping to internal
traffic classes or the mappings for a specific interface.
show classofservice dot1p-mapping [interface]
Syntax Descriptions
Parameter
interface
Command Modes
Privileged Exec
Examples
The following command displays the global 802. 1 p mapping:
(switch) #show classofservice dot1p-mapping
User Priority
Traffic Class
-------------
-------------
0
1
2
3
4
5
Description
Specifies the minimum transmission bandwidth guarantee
for each interface queue.
Activates the weighted scheduler mode for each specified
queue.
Displays the class-of-service queue configuration for the
specified interface.
Description
The port number. If specified, the Dot1p mapping table of
the interface is displayed. If omitted, the most recent
global configuration settings are displayed.
3
1
2
4
5
6
9
383