Cisco Small Business 200 Series User Manual page 269

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following command sets the path cost for mst 1.
(switch) (Interface e1)#spanning-tree mst 1 cost 1000
The following command sets the port priority for mst 1
(switch) (Interface e1)#spanning-tree mst 1 port-priority 240
The following command sets the external path cost for the common and internal
spanning tree (mst instance 0).
(switch) (Interface e1)#spanning-tree mst 0 external-cost 1000
Related Commands
Command
spanning-tree
port mode all
spanning-tree
port mode
spanning-tree
configuration
name
spanning-tree
mst instance
spanning-tree
mst vlan
spanning-tree
priority
spanning-tree
mst
show spanning-
tree
Description
Enables the spanning tree administrative mode for all the
ports.
Enables the spanning tree administrative mode on a specific
port.
Sets the MST Configuration Identifier Name, which
identifies the configuration that the switch is currently using.
Adds a multiple spanning tree instance to the switch.
Adds an association between a multiple spanning tree
instance and one or more VLANs so that the VLAN(s) are no
longer associated with the common and internal spanning
tree.
Configures the spanning tree bridge priority.
Sets the Path Cost or Port Priority for the specified port
within the multiple spanning tree instances or in the
common and internal spanning tree.
Displays spanning tree settings for the common and internal
spanning tree.
5
269