Switchport General Ingress-Filtering Disable; Switchport Trunk Allowed Vlan - Cisco Small Business 200 Series User Manual

VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
switchport
general allowed
vlan

switchport general ingress-filtering disable

Use this command to disable port ingress filtering. To enable ingress filtering on a
port, use the no form of this command.
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default
Ingress filtering is enabled.
Command Mode
Interface Config

switchport trunk allowed vlan

Use this command to add or remove a trunk port as a tagged member of one or
more VLANs.
switchport trunk allowed vlan {add vlan-list | remove vlan-list}
Syntax Descriptions
Parameter
vlan-list
Command Mode
Interface Config
Description
Adds VLANs to or remove VLANs from a general port.
Description
The VLAN IDs to be added to or removed from the port
VLAN memberships, separated by a space.
4
223