Cisco Small Business 200 Series User Manual page 372

Quality of Service
Rate Limit Profile Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
profile-id
cir
cir-value
cbs
burst-size
vlan-id
Command Modes
Global Config
Examples
The following command creates a rate limit for VLAN 2 traffic.
(switch) (Config)#rate-limit profile 1 cir 64 cbs 64 vlan 2
Related Commands
Command
rate-limit profile
(Interface)
show rate-limit
profile
Description
An ID number you assign to the profile. The range is 1–64.
The committed information rate, which is the rate at which
data is transmitted. The rate is averaged over a minimum
time increment.
The committed information rate value in Kbps. The range is
64 Kbps to the port max speed.
The committed burst size in KB, which guarantees amount
of bandwidth for "bursty" traffic on the port. The range is
4–16384KB KB.
The committed burst size value in Kbps. The range is 4–
16384 Kbps.
The VLAN ID this profile applies to.
Description
Applies a profile on a port.
Displays parameters configured in a profile.
9
372