Dot1X Port-Control - Cisco Small Business 200 Series User Manual

Security
Dot1x
NOTE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Parameter
supplicant
Default
All interfaces are configured as authenticators.
Command Modes
Interface Config
Related Commands
Command
dot1x supplicant
port-control
dot1x supplicant
user

dot1x port-control

Use this command to enable the IEEE 802. 1 X operation on the port. Use the no
form of the command to reset it to the default operating mode (auto).
Dot1x is not applicable to LAG ports.
dot1x port-control {force-unauthorized | force-authorized | auto}
no dot1x port-control
Syntax Descriptions
Parameter
force-
unauthorized
Description
The port is configured to requests access to the network.
The supplicant provides credentials to the network that
the another node on the network—the authenticator—
uses to request authentication from a server.
Description
Configures the authentication mode for supplicant on the
interface.
Configures the supplicant user.
Description
The authenticator PAE unconditionally sets the controlled
port to unauthorized.
8
345