Cisco Small Business 200 Series User Manual page 426

SNMP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command Modes
Privileged EXEC
Examples
The following shows sample output for the command.
(switch) #show snmp users
Name Access Mode
------------- --------------- ---- -------
joew Read/Write
cisco Read/Write
00
Name
Access Mode
Auth Meth
Priv Meth
Remote Engine
ID
Related Commands
Command
snmp-server user
Auth Priv
Meth Meth
MD5
The name the user enters to login using SNMP.
Shows whether the user is able to change parameters on
the switch (Read/Write) or is only able to view them (Read
Only). (The default username cisco has Read/Write access.)
The authentication protocol used for the specified user.
(The default username cisco is not configured with an
authentication method.) The authentication method might
be configured to be MD5 or SHA.
The privacy method used for the SNMP user. The factory
default user, cisco, is not configured with a privacy method.
The privacy method might be AES or DES Symmetric
Encryption.
The engine ID of the remote SNMP entity to which the user
belongs.
Description
Configures a new SNMP Version 3 user.
Remote Engine ID
-------------------------
000000630300abcd142e4e0000000000
000000630300abcd142e4e00000000
11
426