Poe - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Administration
PoE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
lldp med
transmit-tlv
show lldp med
poe
Use this command to configure the port as a Power-Sourcing Equipment (PSE)-
capable interface. Use the no form of the command to configure as a non-PSE
interface.
poe
no poe
Default
PoE is enabled on PoE-capable ports (not applicable to non-PoE ports).
Command Modes
Global Config
Interface Config
Usage Guidelines
Use the command in Global Config mode to enable PSE functionality on all PSE-
capable ports. Use the command in Interface Config mode to configure PSE
functionality on a specific port.
Description
Specifies the optional TLVs in the LLDP MED set
transmitted in the Link Layer Discovery Protocol Data Units
(LLDPDUs) on a specific port.
Displays a summary of the current LLDP-MED
configuration.
2
41
Advertisement
Table of Contents
