Spanning-Tree Configuration Name - Cisco Small Business 200 Series User Manual

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
show spanning-
tree

spanning-tree configuration name

Use this command to set the Multiple Spanning Tree (MST) Configuration Identifier
Name that identifies the configuration that the switch is currently using. Use the no
form of the command to reset it to the default value.
spanning-tree configuration name name
no spanning-tree configuration name
Syntax Descriptions
Parameter
name
Default
The default MST configuration name is the base MAC address for the switch.
Command Modes
Global Config
Related Commands
Command
spanning-tree
configuration
revision
show spanning-
tree
show spanning-
tree interface
Description
Displays spanning tree settings for the common and internal
spanning tree.
Description
A string of up to 32 characters.
Description
Sets the MST Configuration Identifier Revision Level, which
identifies the configuration that the switch is currently using.
Displays spanning tree settings for the common and internal
spanning tree.
Displays spanning tree settings and parameters for an
interface.
5
262