Dot1X Timeout Tx-Period - Cisco Small Business 200 Series User Manual

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
show dot1x users

dot1x timeout tx-period

Use this command to set the number of seconds that the switch waits for a
response to an Extensible Authentication Protocol (EAP)-request/identity frame
from the client before resending the request. To return to the default setting, use
the no form of this command.
Change the default value of this command only to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with
certain clients and authentication servers. To provide a faster response time to the
user, enter a smaller number than the default.
dot1x timeout tx-period seconds
no dot1x timeout tx-period
Syntax Descriptions
Parameter
seconds
Default
seconds—30
Command Modes
Interface Config
Description
Displays 802. 1 x port security user information for locally
configured users.
Description
The time that the switch waits for a response to an
Extensible Authentication Protocol (EAP)-request/identity
frame from the client before resending the request. The
range is 1–65535 seconds.
8
355