Dns - Cisco Small Business 200 Series User Manual

IP Configuration

DNS

DNS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following shows sample output for the command.
(switch) #show network ndp
IPv6 Address
d
------------------------------------ ----------------- ----- -------- ------
fe80::20f:feff:fe03:8d9a
IPv6 Address
MAC Address
Neighbor State
Age Updated
Related Commands
Command
show network
The switch supports IPv4 DNS client functionality. When enabled as a DNS client,
the switch provides a hostname lookup service to other applications on the switch
such as ping, RADIUS, syslog, Auto Configuration, and TFTP. You can add and
remove static mappings of domain names to IP addresses. You can also assign
hostnames to IP addresses for hosts on the network.
This section describes the commands you use to configure DNS functionality and
DNS servers.
MAC Address
00:0f:fe:03:8d:9a False Stale
The IPv6 address of the interface.
The MAC Address used.
The state of the neighbor cache entry. Possible values are:
Reachable, Delay.
The time in seconds that has elapsed since an entry was
added to the cache.
Description
Displays the configuration settings associated with the
switch's management interface.
10
Neighbor Age
isRtr State Update
1146
406