Set Igmp Mrouter - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Administration manual (202 pages)
Table of Contents
Advertisement
Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
show
igmpsnooping
set igmp mrouter
Use this command to configure the VLAN ID (vlan-id) that has the multicast router
mode enabled. Use the no form of the command to disable it.
set igmp mrouter vlan-id
no set igmp mrouter vlan-id
Syntax Descriptions
Parameter
vlan-id
Default
IGMP mrouter is disabled on all VLANs.
Command Modes
Interface Config
Related Commands
Command
show
igmpsnooping
mrouter vlan
show
igmpsnooping
mrouter interface
Description
Displays IGMP Snooping information. Configured
information is displayed whether or not IGMP Snooping is
enabled.
Description
The ID of the VLAN to configure.
Description
Displays information about static and dynamic multicast
router information on the port.
Displays information about statically configured mrouter
ports.
7
307
Advertisement
Table of Contents
