Show Telnetcon - Cisco Small Business 200 Series User Manual

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Usage Guidelines
When the timeout value is changed, the new value is applied to all active and
inactive sessions immediately. Any sessions that have been idle longer than the
new timeout value are disconnected immediately.
Related Commands
Command
ip telnet server
enable
telnet
show network

show telnetcon

show telnetcon
Use this command to display Telnet configuration and status information, such as
the configured timeout, the number of allowed sessions, and the administrative
mode for making outbound Telnet connections from the switch.
show telnetcon
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show telnetcon
Remote Connection Login Timeout (minutes)...... 5
Maximum Number of Remote Connection Sessions... 2
Allow New Telnet Sessions...................... Yes
Telnet Server Admin Mode....................... Disable
Description
Enables Telnet connections to the system and enables the
Telnet Server Admin Mode.
Establishes a new outbound Telnet connection to a remote
host.
Displays configuration settings associated with the
switch's management interface.
Displays Telnet configuration and status information.
2
79