Logging Console Enable; Logging Console Severity - Cisco Small Business 200 Series User Manual

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
clear logging
buffered
logging buffered
enable
show logging
buffered

logging console enable

Use this command to enable logging to a terminal connected to the console port.
To stop console logging, use the no form of this command.
logging console enable
no logging console enable
Default
Console logging is disabled.
Command Modes
Global Config
Related Commands
Command
logging console
severity

logging console severity

Use this command to limit console message logging to a specified severity level.
Use the no form of the command to set the severity level to the default value (2).
logging console severity serveritylevel
no logging console severity
Description
Clears the buffered log.
Enables buffered logging.
Displays buffered in-memory logging information and log
entries.
Description
Limits buffered message logging to a specified severity
level.
2
140