Show Logging Traplogs - Cisco Small Business 200 Series User Manual

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
clear logging
persistent

show logging traplogs

Use this command to display the SNMP trap events and statistics. The Trap Log
capacity is 64 entries.
show logging traplogs
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show logging traplogs
Number of Traps Since Last Reset............... 11
Trap Log Capacity.............................. 64
Number of Traps Since Log Last Viewed.......... 11
Log System Up Time
--- ------------------------ -----------------------------------------------
0 0 days 04:15:24
1 0 days 04:00:23
2 0 days 03:48:10
3 0 days 03:47:54
4 0 days 02:36:43
5 0 days 02:27:40
6 0 days 02:27:28
7 0 days 00:01:19
8 0 days 00:00:42
9 0 days 00:00:23
10 0 days 00:00:23
Number of
Traps Since
Last Reset
Trap Log
Capacity
Description
Clears messages from the persistent log memory and the
other versions.
Trap
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Failed User Login: Unit: 1 User ID: cisco
Cold Start: Unit: 0
Link Up: e1
Temperature change alarm: Sensor ID: 1 Event: 1
Temperature change alarm: Sensor ID: 0 Event: 1
The number of traps since the last boot.
The number of traps the system can retain.
2
154