Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
logging persistent enable
Use this command to enable persistent logging to Flash memory. To stop
persistent logging, use the no form of this command.
logging persistent enable
no logging persistent enable
Default
Persistent logging is disabled.
Command Modes
Global Config
Related Commands
Command
logging persistent
severity
logging persistent
size
show logging
persistent
logging persistent severity
Use this command to limit persistent logging (to Flash memory) to a specified
severity level. Use the no form of the command to set the severity level to the
default value (2).
logging persistent severity severity-level
no logging persistent severity
Description
Limits buffered message logging to a specified severity
level.
Sets the log size for persistent logging.
Displays persistent memory logging information and log
entries.
2
144