Show Mldsnooping - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

show mldsnooping

Use this command to display MLD Snooping information for all VLANs or for a
specified VLAN. Configured information is displayed whether or not MLD
Snooping is enabled.
show mldsnooping {vlan-id}
Syntax Descriptions
Parameter
vlan-id
Command Modes
Privileged Exec
Examples
When the optional argument vlan-id is not used, the command displays the
following information.
(switch) #show mldsnooping
Admin Mode..................................... Disable
Multicast Control Frame Count.................. 0
VLANs enabled for MLD snooping................. None
Admin Mode
MLD Control
Frame Count
VLANS Enabled
for MLD
Snooping
When you specify a value for vlan-id, the following information appears.
(switch) #show mldsnooping 2
VLAN ID........................................ 2
MLD Snooping Admin Mode........................ Disabled
Description
The ID of the VLAN to display information on. If no VLAN ID
is specified, information for all VLANs displays.
Indicates whether or not MLD Snooping is active on the
switch.
The number of MLD control frames that are processed by
the CPU.
The list of VLANS on which MLD Snooping is enabled.
7
321