Sntp Trusted-Key - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Administration manual (202 pages)
Table of Contents
Advertisement
Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
The parameter defaults are as follows:
•
version—4
•
port—123
•
key—0
Command Modes
Global Config
Examples
The following command enables one of the build in SNTP servers.
(switch) (Config)#sntp server time-a.timefreq.bldrdoc.gov enable
The following command disables the same server.
(switch) (Config)#no sntp server time-a.timefreq.bldrdoc.gov enable
The following command configures a new SNTP server, but does not enable it.
(switch) (Config)#sntp server 10.25.67.2 version 3 port 2123 key 432523
The following command configures a new SNTP server and enables it.
(switch) (Config)#sntp server 10.25.67.2 version 3 port 2123 key 432523
enable
Related Commands
Command
show sntp
show sntp server
sntp trusted-key
Use this command to authenticate the identity of a system to which SNTP will
synchronize. To disable authentication of the identity of the system, use the no
form of this command.
sntp trusted-key key-number
no sntp trusted-key key-number
Description
Displays SNTP settings and status.
Displays settings for configured SNTP unicast servers.
2
111
Advertisement
Table of Contents
