Show Port-Security - Cisco Small Business 200 Series User Manual

Security
MAC Based Port Security
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

show port-security

Use this command to display the port-security settings. If you do not use a
parameter, the command displays the settings for the entire system. Use the
optional parameters to display the settings on a specific interface or on all
interfaces. It also shows whether the port is shut down by the port-security
feature.
show port-security
Syntax Descriptions
Parameter
interface
all
Command Modes
Privileged Exec
Examples
This field displays if you do not supply any parameters
(switch) #show port-security
Port Security Administration Mode: Enabled
If you specify an interface, the following fields display:
(switch142E4E) #show port-security e1
Admin Dynamic
Intf Mode Limit
------ ------- ---------
-
e1 Disabled 0
If you specify the all parameter, the same files display for all interfaces.
Intf
Admin Mode
[ ]
{interface | all}
Description
The port number.
Displays port security configuration for all ports.
Static Violation
Limit Action
-------- ------------ -------- --------
256 discard
The port name.
Port Locking mode for the interface.
8
Trap Port
Trap Frequency Status
------
Disabled N/A Active
369