Addport; Deleteport (Interface Config) - Cisco Small Business 200 Series User Manual

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
This section describes the commands you use to configure link aggregation.

addport

This command adds a port to a LAG.
addport logical interface
Syntax Descriptions
Parameter
logical interface
Command Modes
Interface Config
Examples
The following command adds interface e5 to LAG ch1:
(Switch) (config)#interface e5
(Switch) (Interface e5)#addport ch1
Related Commands
Command
deleteport
(Interface Config)
deleteport (Global
Config)
show port-
channel brief

deleteport (Interface Config)

This command deletes the port from the LAG. The interface is the logical interface
number of a configured LAG.
deleteport logical interface
Description
The LAG number that the port will be added to.
Description
Deletes a port from a LAG.
Deletes all configured member ports from a LAG.
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.
3
200