Logging Host - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
severitylevel
Default
severitylevel—critical (2).
Command Modes
Global Config
Related Commands
Command
logging console
enable
logging host
Use this command to enable logging to a host (syslog server). You can configure
up to eight logging hosts.
logging host addresstype {ipaddr | hostname} [port] [severitylevel]
Description
The severity level of the traps to be logged. You can
specify an integer from 0 to 7 or one of the following
keywords:
•
emergency (0)
•
alert (1)
•
critical (2)
•
error (3)
•
warning (4)
•
notice (5)
•
info (6)
•
debug (7)
Description
Enables logging to a terminal connected to the console
port.
2
141
Advertisement
Table of Contents
