Passwords Strength-Check - Cisco Small Business 200 Series User Manual

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
passwords aging
password
show passwords
configuration

passwords strength-check

Use this command to enable the switch to perform the configured password
strength checks when users log in. The strength checks are configured separately
Commands). Use the no form of this command to disable password
(see Related
strength checking.
passwords strength-check
no passwords strength-check
Default
This feature is enabled.
Command Modes
Global Config
Related Commands
Command
passwords
strength check-
username
passwords
strength exclude-
keyword
Description
Implement aging on passwords for local users.
Allows a user to change their password after it has
expired.
Displays the configured password management settings.
Description
Configures the switch to prevent users from including their
user names in their passwords when they create or
change their password.
Configures the switch to check whether preconfigured
keywords are used in a password when a user attempts to
create or change the password.
2
61