Cisco Small Business 200 Series User Manual page 313

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following shows sample output for the command.
(Switch) #show mac-address-table igmpsnooping
MAC Address
-----------------------
00:01:01:00:5E:01:02:03
The following fields display for the configured IGMP Snooping table entries:
MAC Address
Type
Interfaces
Related Commands
Command
set igmp
Type Interfaces
------- --------------
Dynamic Fwd: e24
A multicast MAC address for which the switch has
forwarding or Filtering information. The format is two-digit
hexadecimal numbers that are separated by colons, for
example 00:01:01:00:5e:01:02:03. In an IVL system the MAC
address is displayed as a MAC address and VLAN ID
combination of 8 bytes.
The type of the entry, which is either static (added by the
user) or dynamic (added to the table as a result of a learning
process or protocol).
The list of interfaces that are designated for forwarding
(Fwd:) and filtering (Flt:).
Description
Enables IGMP snooping on a particular VLAN.
7
313