VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following example shows command output.
(switch) #show auto-voip oui-based interface e1
Interface
Auto VoIP Mode Port Status
---------
-------------- -----------
e1
Enabled
AutoVoIP Mode
Port Status
Related Commands
Command
auto-voip oui-
based
auto-voip oui-
based all
show auto-voip
sessions
show auto-voip oui-table
Use this command to show all configured Organizationally Unique Identifiers
(OUIs) on the switch.
show auto-voip oui-table
Command Modes
Privileged Exec
Down
The Auto VoIP mode on the interface.
The operational status of the port.
Description
Enables the VoIP Profile on an interface.
Enables the VoIP Profile on all the interfaces of the switch.
Displays the currently running protocol-based Auto VoIP
sessions on an interface or interfaces.
4
249